CCNP Routing and Switching Certification Training Course
Overview
Cisco Certified Network Professional (CCNP) Routing and Switching certification validates the ability to plan, implement, verify and troubleshoot local and wide-area enterprise networks and work collaboratively with specialists on advanced security, voice, wireless and video solutions. The CCNP Routing and Switching certification is appropriate for those with at least one year of networking experience who are ready to advance their skills and work independently on complex network solutions. Those who achieve CCNP Routing and Switching certification have demonstrated the skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician. The routing and switching protocol knowledge from this certification will provide a lasting foundation as these skills are equally relevant in the physical networks of today and the virtualized network functions of tomorrow.
SpireTec Solutions provides CCNP routing and switching certification with our experienced Instructor. CCNP routing and switching certification is most demanded certification in CISCO.
The best way to prepare for this certification is to take the Cisco-approved training:
Implementing Cisco IP Routing (ROUTE)
Students will learn to plan, configure and verify the implementation of secure enterprise LAN and WAN routing solutions using a range of routing protocols.
Implementing Cisco IP Switched Networks (SWITCH)
Students will learn to plan, configure and verify the implementation of complex enterprise switching solutions using Cisco’s Campus Enterprise Architecture.
Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)
Students will learn to (1) plan and perform regular maintenance on complex enterprise routed and switched networks and (2) use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting.
Recertification
Cisco Professional-level certifications (CCNP, CCNP Wireless, CCDP, CCSP, CCNP Security, CCNP Voice, CCIP, CCNP Service Provider, CCNP Service Provider Operations, and CCNP Data Center) are valid for three years. To recertify, pass ONE of the following before the certification expiration date:
- Pass any current 642-XXX Professional-level or any 300-XXX Professional-level exam, or
- Pass any current CCIE Written Exam, or
- Pass the current CCDE Written Exam OR current CCDE Practical Exam, or
- Pass the Cisco Certified Architect (CCAr) interview AND the CCAr board review to extend lower certifications
Prerequisites
Valid Cisco CCNA Routing and Switching certification or any Cisco CCIE certification can act as a prerequisite.
Recommended Course
Full Description
Implementing Cisco IP Routing (ROUTE) 2.0
Course Objectives
Upon completing this course, the learner will be able to meet these overall objectives:
- Describe routing protocols, different remote connectivity options and their impact on routing and implement RIPng
- Configure EIGRP in IPv4 and IPv6 environment
- Configure OSPF in IPv4 and IPv6 environment
- Implement route redistribution using filtering mechanisms
- Implement path control using policy-based routing and IP SLA
- Implement enterprise Internet connectivity
- Secure Cisco routers according to best practices and configure authentication for routing protocols
Course Outline
- Module 1: Basic Network and Routing Concepts
- Module 2: EIGRP Implementation
- Module 3: OSPF Implementation
- Module 4: Configuration of Redistribution
- Module 5: Path Control Implementation
- Module 6: Enterprise Internet Connectivity
- Module 7: Routers and Routing Protocol Hardening
Implementing Cisco IP Switched Networks (SWITCH) 2.0
Course Objectives
Upon completing this course, the learner will be able to meet these overall objectives:
- Describe the hierarchical campus structure, basic switch operation, use of SDM templates, PoE, and LLDP
- Implement VLANs, trunks, explain VTP, implement DHCP in IPv4 and IPv6 environment, and configure port aggregation
- Implement and optimize STP mechanism that best suits your network - PVSTP+, RPVSTP+, or MSTP
- Configure routing on a multilayer switch
- Configure NTP, SNMP, IP SLA, port mirroring, and verify StackWise and VSS operation
- Implement First Hop redundancy in IPv4 and IPv6 environments
- Secure campus network according to recommended practices
Course Outline
- Module 1: Basic Concepts and Network Design
- Module 2: Campus Network Architecture
- Module 3: Spanning Tree Implementation
- Module 4: Configuring Inter-VLAN Routing
- Module 5: Implementing High Availability Networks
- Module 6: First Hop Redundancy Implementation
- Module 7: Campus Network Security
Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) 2.0
Course Objectives
Upon completing this course, the learner will be able to meet these overall objectives:
- Describe the troubleshooting tools and methodologies that are used to identify and resolve issues in complex enterprise networks
- Isolate and fix the network issues that your company, SECHNIK Networking Ltd., is facing
- Isolate and fix the network issues that your customer, TINC Garbage Disposal Ltd., is facing
- Isolate and fix the network issues that your customer, PILE Forensic Accounting Ltd., is facing
- Isolate and fix the network issues that your customer, Bank of POLONA Ltd., is facing
- Isolate and fix the network issues that your customer, RADULKO Transport Ltd., is facing
Course Outline
- Module 1: Tools and Methodologies of Troubleshooting
- Module 2: Troubleshooting at SECHNIK Networking Ltd
- Module 3: Troubleshooting at TINC Garbage Disposal Ltd.
- Module 4: Troubleshooting at PILE Forensic Accounting Ltd
- Module 5: Troubleshooting at Bank of POLONA Ltd
- Module 6: Troubleshooting at RADULKO Transport Ltd
Fees & Schedule
Delivery Mode | Course Duration | Fees |
---|---|---|
Live Virtual Training | 15 Days | Ask for Quote |
Onsite Classroom Training | 15 Days | Ask for Quote |
Customized Training | 15 Days | Ask for Quote |